Please use this identifier to cite or link to this item:
http://dspace.aiub.edu:8080/jspui/handle/123456789/876
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Abdullah Al, Araf | - |
dc.contributor.author | Aktab, Shafin Asif | - |
dc.contributor.author | Trisha, Sadia Islam | - |
dc.contributor.author | Hasan, Mehedi | - |
dc.date.accessioned | 2023-01-28T08:09:34Z | - |
dc.date.available | 2023-01-28T08:09:34Z | - |
dc.date.issued | 2023-01-18 | - |
dc.identifier.uri | http://dspace.aiub.edu:8080/jspui/handle/123456789/876 | - |
dc.description.abstract | A new conception for Solar Base a water purification and electrical IoT base monitoring system to fulfill the wants for clean water and electricity in one integrated, autonomous and efficient system is bestowed during this project. The sublimate water and power receiver contain 2 devices one is the charge controller and the another is the voltage-current sensor. Then the battery is connected to the Arduino with another voltage sensor. The water purifier is connected to a battery to consume power for purifying the unpurified water.Using the water flow sensor for how much water purifies through the water purifierthe water flow sensor is connected to Arduino and also uses a pH sensor for the purified water pH measurement. If the water purifier level is not pure then the relay was on the solenoid valve for mixed purifier solution to purify the water which is purity by the purifier. All the sensors and relays are connected to the Arduino for processing all the data from the sensor. For the IoT monitoring system use the wifi, Blynk server, and mobile Apps. All processing data send to the web server for remote monitoring. purifier water is unsafe than having to get a notification for mixing the pH solution. Potential sites for Solar Power and water purification systems embrace both rural and urban areas. An initial analysis of this potential has been conducted for the development country case. This system work perfectly here got well power source from solar and a backup to the battery. Better to monitor pH solar voltage, battery charge, output voltage, output current, and how much water has been used. | en_US |
dc.publisher | “Faculty of Engineering, American International University – Bangladesh | en_US |
dc.relation.ispartofseries | 2022.2;2022.2.3 | - |
dc.title | IoT BASED WATER PURIFICATION SYSTEM USING SOLAR ENERGY | en_US |
dc.type | Thesis | en_US |
Appears in Collections: | Capstone Project Books |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Capstone-Project-Book-2022.2.3.pdf | 1.02 MB | Adobe PDF | View/Open |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.