Please use this identifier to cite or link to this item: http://dspace.aiub.edu:8080/jspui/handle/123456789/843
Full metadata record
DC FieldValueLanguage
dc.contributor.authorAhmed, Md. Shakil-
dc.contributor.authorHossain, Almas-
dc.contributor.authorBhuiyan, Md. Ashraful Ahammed-
dc.contributor.authorBhuyan, Muhibul Haque-
dc.date.accessioned2023-01-16T05:59:58Z-
dc.date.available2023-01-16T05:59:58Z-
dc.date.issued2019-12-04-
dc.identifier.citationM. S. Ahmed, A. Hossain, M. A. A. Bhuiyan and M. H. Bhuyan, “Design, Implementation and Testing of a Dye-Sensitized Solar Cell,” Proceedings of the National Conference on Electronics and Informatics, jointly organized by the Bangladesh Electronics Society and Bangladesh Atomic Energy Commission, held at Bangladesh Atomic Energy Center (BAEC), Dhaka, Bangladesh, 4-5 Dec. 2019, p. 56.en_US
dc.identifier.urihttp://dspace.aiub.edu:8080/jspui/handle/123456789/843-
dc.description.abstractDesigning adaptable energy systems is a big challenge for any sustainable design. Such a system should be able to provide uninterrupted services in varying climatic conditions. This research work aims to design and implement a very simple solar cell by reducing the design and manufacturing cost in case of environmental changes. This is a biological design using various types of dyes from biological materials. Dye-sensitized solar cell (DSSC) is one of the most important and latest generation thin film solar cells. It has recently been implemented for harnessing electrical energy from sunlight. It can convert up to 15% of solar energy into electrical energy through optoelectronic processes. This process is very much cheaper in terms of manufacturing cost than that of the traditional photovoltaic systems. Besides, DSSCs offer greater mechanical durability and design flexibility. The objective of this work is to design, implement and test a low-cost DSSC. Different dyes have been collected from various biological materials like fruits, vegetables, etc. Then the other chemicals are used to fabricate the DSSCs. The overall performance of a DSSC depends on the light absorption capability of the dye sensitizer and the diffusion of the ejected electrons through the mesoporous TiO2 film. The photovoltaic performances in terms of open circuit voltage and short circuit current were measured with an air-mass ratio of 1.5 global (AM1.5G) having an irradiance of 100 mW/cm2. The optical properties of the designed solar cell with the dyes extracted from the pomegranate were investigated. Test results were found very satisfactory.en_US
dc.description.sponsorshipSelf-funded.en_US
dc.language.isoen_USen_US
dc.publisherBangladesh Electronics and Informatics Societyen_US
dc.subjectDye-Sensitized Solar Cellen_US
dc.subjectDesignen_US
dc.subjectTiO2 Filmen_US
dc.subjectAir-Mass Ratioen_US
dc.titleDesign, Implementation and Testing of a Dye-Sensitized Solar Cellen_US
dc.typeArticleen_US
Appears in Collections:Publications From Faculty of Engineering

Files in This Item:
File Description SizeFormat 
Draft_DSpace_Publication_Info_Upload_FE_Prof Muhibul BEIS Dye-Sensitized.docx3.34 MBMicrosoft Word XMLView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.