Please use this identifier to cite or link to this item: http://dspace.aiub.edu:8080/jspui/handle/123456789/2531
Title: Copper doping effect in the back surface field layer of CdTe thin film solar cells
Authors: Ahmad, Nur Irwany
Sieh Kiong, Tiong
Doroody, Camellia
Rahman, Kazi Sajedur
Norizan, Mohd Natashah
Ahmad, Mohd Fairus
Kar, Yap Boon
Harif, Muhammad Najib
Amin, Nowshad
Keywords: Energy
Solar cell
Solar Cell Capacitance Simulator (SCAPS)
Back surface field (BSF)
Cadmium telluride (CdTe)
Zinc telluride (ZnTe)
Density functional theory (DFT)
Issue Date: Jan-2024
Publisher: Elsevier
Abstract: In this work, the Solar Cell Capacitance Simulator (SCAPS-1D) is employed to evaluate the characteristics of CdTe thin films with ZnTe as the Back Surface Field (BSF) layer and estimate the effective copper doping ratio at both the atomic scale and the device operational response perspective. The electrical characteristics of ZnTe, at varying levels of copper doping, were derived using density functional theory (DFT) by applying the generalized gradient approximation (GGA) and Hubbard U corrections (DFT+U). The performance of ZnTe with different Cu concentrations as a BSF layer was evaluated by analysing the values of four key parameters that are open circuit voltage (VOC), short circuit current density (JSC), fill factor (FF), and conversion efficiency (η). The results indicate that an increase in Cu concentration from 0% to 3%, 6%, 10%, and 12% resulted in a reduction of the energy band gap. Specifically, the energy band gap decreased from 2.24 eV to 2.10 eV, 1.98 eV, 1.92 eV, and 1.88 eV, respectively. Optimal Cu doping promotes the favourable shift in the valence band maxima (VBM) and formation of p + -ZnTe, lowering thermionic emission and improving carrier lifetime, which results in an improved ohmic contact, η = 18.73% for 10% of Cu content. Excessive doping in contrast degraded the overall device performance by forming an unmatched carrier band offset at the front interface with CdS, increasing the acceptor type defect and CdTe compensation rate. Overall, the findings suggest that incorporating a controlled level of Cu, which in this case is around 10%, promotes the efficiency and stability of the proposed CdTe device configuration to a certain extent.
Description: Energy Solar Cell Capacitance Simulator (SCAPS) Back surface field (BSF) Cadmium telluride (CdTe) Zinc telluride (ZnTe) Density functional theory (DFT)
URI: http://dspace.aiub.edu:8080/jspui/handle/123456789/2531
ISSN: 1110-0168
Appears in Collections:Publications From Faculty of Engineering

Files in This Item:
File Description SizeFormat 
DSpace_Publication_Info_Upload_FE_IAna ID7084.docx2.93 MBMicrosoft Word XMLView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.